Create Bootable USB for Mac on Windows 10, Mac and Windows file system is completely different, so you are not able to create bootable USB for Mac with PowerShell, CMD or Rufus.If you remembered, till MacOS sierra the Apple file system was Hackintosh, but MacOS 10.13 High Sierra has the technology of Apple Filesystem. That’s why we can’t create bootable USB with Windows tools. You set your Mac or Macbook which disk to start up from when more than one startup disk is connected. This works for USB drives including the NinjaStik For 2018 to 2020 Macs with the Secure Boot T2 Chip, see the 2020 Macbook Pro Boot from USB instructions. A “startup disk” is a volume or partition of a drive that contains a bootable operating system. The current release is 0.14. It is available in various forms. Both disk image distributions include the Installer package and can be burned as a bootable CD as well. All three binary distributions can be used to install rEFIt on a USB memory stick or other disk drives. REFIt 0.14 (6.5M Mac disk image) rEFIt 0.14 (6.5M ISO disk image). Possibly the best and most complete tool to create bootable USB drives from ISO files in. This Linux bootloader can easily boot into Mac OS X, Windows, and Linux kernels with EFISTUB support. It is also is known for its easy to use GUI interface, which supports features like native resolution for widescreen monitors. If you’re a modern Unix user in possession of several Linux and Mac systems, Clover is an excellent choice for you.
What’s Needed:
In this tutorial we will be creating the bootloader that will allow you to run the macOS installer that will also be created in this guide onto your to-be Hackintosh. This will be created using a flash drive that needs to be 8GB or larger in size so that it has enough space ton hold the Sierra or El Capitan installer files.
You’ll need to be running macOS in order to complete this guide. If you do not have a mac available for use, you can learn how to create a virtual machine on your computer before following this guide:
STEP 1: Creating the macOS Installer
The first step to making a hackintosh is transferring the macOS install files to a USB flash drive to do that follow the guide: How to make a macOS flash drive installer
STEP 2: Setting up the EFI Boot Partition
- DownloadClover EFI Bootloader
- Unzip & Open Clover folder
- Right-click & Open Clover EFI Bootloader (Note: Unsigned Apps like Clover must be right-click opened to avoid security warning)
- Click Continue
- Click Continue again
- Click Change Install Location…
- Select your Flash Drive under destination
- Click Continue
- Click Customize
- Check the following boxes:
- Click Install
- Enter Password and click Install Software
- Click Close
- Click Keep if it prompts
Next Step
Now that you have created a USB Installer you will need to make it bootable on your PC.
If you are following one of our custom guides return to that guide for custom boot steps.
Bootloader Usb For Mac Os
Otherwise follow our general guild on How-to Make Your Hackintosh Installer Bootable
To use any of these key combinations, press and hold the keys immediately after pressing the power button to turn on your Mac, or after your Mac begins to restart. Keep holding until the described behavior occurs.
- Command (⌘)-R: Start up from the built-in macOS Recovery system. Or use Option-Command-R or Shift-Option-Command-R to start up from macOS Recovery over the Internet. macOS Recovery installs different versions of macOS, depending on the key combination you use while starting up. If your Mac is using a firmware password, you're prompted to enter the password.
- Option (⌥) or Alt: Start up to Startup Manager, which allows you to choose other available startup disks or volumes. If your Mac is using a firmware password, you're prompted to enter the password.
- Option-Command-P-R:Reset NVRAM or PRAM. If your Mac is using a firmware password, it ignores this key combination or starts up from macOS Recovery.
- Shift (⇧): Start up in safe mode. Disabled when using a firmware password.
- D: Start up to the Apple Diagnostics utility. Or use Option-Dto start up to this utility over the Internet. Disabled when using a firmware password.
- N: Start up from a NetBoot server, if your Mac supports network startup volumes. To use the default boot image on the server, hold down Option-N instead. Disabled when using a firmware password.
- Command-S: Start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password.
- T: Start up in target disk mode. Disabled when using a firmware password.
- Command-V: Start up in verbose mode. Disabled when using a firmware password.
- Eject (⏏) or F12 or mouse button or trackpad button: Eject removable media, such as an optical disc. Disabled when using a firmware password.
If a key combination doesn't work
If a key combination doesn't work at startup, one of these these solutions might help:
Mac Bootloader Download
- Be sure to press and hold all keys in the combination together, not one at a time.
- Shut down your Mac. Then press the power button to turn on your Mac. Then press and hold the keys as your Mac starts up.
- Wait a few seconds before pressing the keys, to give your Mac more time to recognize the keyboard as it starts up. Some keyboards have a light that flashes briefly at startup, indicating that the keyboard is recognized and ready for use.
- If you're using a wireless keyboard, plug it into your Mac, if possible. Or use your built-in keyboard or a wired keyboard. If you're using a keyboard made for a PC, such as a keyboard with a Windows logo, try a keyboard made for Mac.
- If you're using Boot Camp to start up from Microsoft Windows, set Startup Disk preferences to start up from macOS instead. Then shut down or restart and try again.
Remember that some key combinations are disabled when your Mac is using a firmware password.
Learn more
Bootloader For Windows
- Learn what to do if your Mac doesn't turn on.
- Learn about Mac keyboard shortcuts that you can use after your Mac has started up.